Xhorse Multi-PROG Multi Prog ECU TCU Programmer With GODIAG ECU GPT Boot AD and G-V ECU Cable For Read and write VAG Gearbox

Xhorse Multi-PROG Multi Prog ECU TCU Programmer With GODIAG ECU GPT Boot AD and G-V ECU Cable For Read and write VAG Gearbox

Highlights:

1. Bunding Package:
Xhorse Multi Prog Pro-level ECU TCU Programmer
GODIAG ECU GPT Boot AD ECU Connector
GODIAG G-V ECU Cable
2. GODIAG ECU GPT Adapter can help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GTP Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.
4. Enabling ECU reading and writing via Bench/Boot modes.

GODIAG G-V ECU Cable

GODIAG G-V ECU Cable is used to connect Xhorse MULTI PROG with GT107 or GT107+ GPT BENCH BOOT to read and write data on VAG gearbox ECU and engine ECU, clone ECU.

The Connection Diagram

1. To read DQ200 with Xhorse MULTI PROG & GT107+

2. To read DQ250 with Xhorse MULTI PROG & GT107+

3. To read DQ200 with Xhorse MULTI PROG & GT107

4. To read DQ250 with Xhorse MULTI PROG & GT107

5. To read ME17.8.8 with Xhorse MULTI PROG & GODIAG ECU GPT Boot AD Programming Adapter

6. To read MED17.5 with Xhorse MULTI PROG & GODIAG ECU GPT Boot AD Programming Adapter


Need Xhorse MULTI PROG

Supported ECU Models:

For Volkswagen, for Skoda, for Seat:

TEMIC DQ200-MQB
TEMIC DQ200-G2
TEMIC DQ200Dxx
TEMIC DQ250-MQB
TEMIC DQ250Exx/Fxx
CONTINENTAL DQ500
BOSCH DQ380
BOSCH DQ381
TEMIC DQ400E









Xhorse Multi-Prog Programmer Pro-level ECU TCU Programmer Highlights:

1.Fully Replace VVDI Prog:
Multi-Prog support factory usage mode for batch programming of chips. In this mode, the functions of batch programming, offline programming, and file offline programming can be done easily.
The main difference between VVDI PROG and Multi-Prog: Multi-Prog has the batch programming function but VVDI PROG programmer doesn't.
2. With Free MQB48 License and BMW Bench Read ISN.
Bind with Xhorse VVDI2/ Key Tool Plus PAD account, then your VVDI2/Key Tool Plus PAD can use MQB48 Function too
3. Read, Write and Clone ECU
4. Read, Write and Clone Gearbox TCU
5. Read EEPROM, ECU, MCU
6. Read and Write Bosch ECU ISN with new Bosch ecu adapter
7. Supports Checksum correction for some EDC16/EDC17 ECUs (more to come)
8. Get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service
9. With built-in free MQB48 license. Bind Multi-prog and VVDI2 (full version) or key tool plus to the same Xhorse app account to use MQB48 NEC35XX function.
10. Free software and firmware update timely.
11. NEW! Add VAG MQB RH850 dashboard processor (Need Extra Xhorse XDMPR8GL MQB-RH850/V850 Adapter )
12. Also Compatiable with Xhorse MQB Solder-free Adapters
13. Can work with Xhorse Multi-Prog Exclusive Adapters 4 in 1 to extend more chip reading and writing.
15.Xhorse Multi-Prog Free Software Download

Other Features:

Support R&W lots of chips, include MC9S08 series, MC68HC(9)12series, MC9S12series, V850series, H8Xseries, R8Cseries, PCF79XXseries and most eeprom chips etc .
Support chip data verify, checkblank function
Support data file compare function
Free Pin code calculation service by Dump for various models
Support Read and Write BMW N20, N55 ECU (show ISN directly)
Stable Read and Write MC9S12XE series chips (5M48H/ 1N35H/ 2M53J/ 3M25J etc.)
Support renew PCF79XX remote, currently support BMW E/F series (Please Note PCF79XX adapter is optional)
Has the largest database of connection diagram
Reserve Ports: For future update
Supports Repair Porsche 12V lithium battery and BYD Lithium Battery (MC9S12XET256)
Supports EDC17/MED17 data calculation (checksum correction)
Support for third-party automatic HEX editing scripts
Supports Expert mode: batch write chips. vvdi prog only write a single chip at a time




GODIAG ECU GPT Boot Adapter Features:

GODIAG ECU GPT Boot AD programming adapter can help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GPT Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.

1. ECU dedicated connection terminal.
2. Support manual ignition power control
3. The ECU interface cable is labeled
4. Support ECU conversion to OBD2 mode to read and write data
5. Support RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, GND.
6. Support PCMFlash automatic control of ignition power supply
7. Support ECU opening BOOT method to read and write data
8. CANbus is equipped with a switch to freely select the 120Ω resistor
9. Support GPT to read and write data without disassembling the ECU.
10. Equipped with BOOT resistance board connecting cable [anti-lost resistor design]

GODIAG ECU GPT Boot Adapter Functions:

Diagnostic function supports standard OBD2 protocol equipment.
Supports ECU reading and writing data, and supports J2534 devices.
Only Scanmatik 2 PRO for PCMflash allows to form GPT1, GPT2 signals necessary to work with Module 71.
Other devices Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR,
Teradyne GNA600 (VCM 1), Mazda VCM 2 supports OBD2 or BOOT 53 mode to read and write ECU data.



Package Includes:

1pc x Multi-PROG
1pc x USB Cable
1pc x Power Adapter (15V 4A)
1pc x 220V Power Cord
1pc x VH13 Interface Adapter Board
1pc x VH20 Interface Adapter Board
1pc x VH23 Interface Adapter Board
1pc x MCU Adapter Multi-PROG Solder Cable
1pc x MCU DB15 Adapter Cable
1pc x ECU Adapter Multi-PROG Solder Cable
1pc x ECU DB15 Adapter Cable
1pc x Multi-PROG OBD Cable
1pc x USB WIFI Network Card
1pc x Product Manual
1pc x Certificate Of Conformity
43pcs x ECU Cable Plugs
1pc x GODIAG ECU GPT Boot AD Programming Adapter