Scorpio-LK Emulators SLK-07E and SLK-07 for Tango Key Programmer – Toyota & Lexus 128-bit Smart Keys

Cloning Existing Toyota/Lexus 128-bit Smart Keys with Page 1 AA

Clone existing Toyota/Lexus 128-bit smart keys with Page 1 AA using the SLK-07 utility function. This process enables the addition of used (reset) or otherwise unauthorized Toyota/Lexus 128-bit smart keys with Page 1 AA to a vehicle.

System Requirements for Cloning

• Tango programmer
• SLK-07E emulator
• Toyota maker
• SLK-07 maker

System Requirements for SLK-07 Utility

• Tango programmer
• SLK-07E emulator
• Toyota maker
• SLK-07 maker
• Toyota Techstream online service (3rd party service)
• Internet connection

Power and Battery Information

The SLK-07E is battery powered. Note that a battery is not included with the emulator and must be obtained locally. Three standard battery types are compatible: CR1616, CR1620, and CR1632. The SLK-07E retains programmed data even when not powered.

Cloning an Existing P1 AA Smart Key

Cloning existing Toyota/Lexus 128-bit smart keys with Page 1 AA is straightforward and follows the same workflow as other cloning functions in Tango:

1. Insert the key to be cloned into the coil.
2. Press Read.
3. Press Decode Transponder.
4. Once decoded, remove the key and place a battery-powered SLK-07E emulator in the coil.
5. Press Write.

SLK-07 Utility

The SLK-07 Utility interface is self-explanatory and requires an internet connection. Note that Step 3 requires access to the Toyota Techstream online service, which is a third-party service not provided by us. Availability of this service may vary due to external factors.

Frequently Asked Questions (FAQ)

Q: Does SLK-07 allow for all-keys-lost situations?

A: No

Q: Does removing the battery erase data in SLK-07?

A: No, but the emulator still requires power in order to operate.