![M35080V6 EEPROM Eraser/Programmer](https://www.ukobd2.com/upload/pro/m35080v6-eeprom-eraser-programmer-free-shipping-1021-1.jpg)
![M35080V6 EEPROM Eraser/Programmer](https://www.ukobd2.com/upload/pro/m35080v6-eeprom-eraser-programmer-free-shipping-1021-2.jpg)
![M35080V6 EEPROM Eraser/Programmer](https://www.ukobd2.com/upload/pro/m35080v6-eeprom-eraser-programmer-free-shipping-1021-3.jpg)
![M35080V6 EEPROM Eraser/Programmer](https://www.ukobd2.com/upload/pro/m35080v6-eeprom-eraser-programmer-free-shipping-1021-4.jpg)
![M35080V6 EEPROM Eraser/Programmer](https://www.ukobd2.com/upload/pro/m35080v6-eeprom-eraser-programmer-free-shipping-1021-5.jpg)
![M35080V6 EEPROM Eraser/Programmer](https://www.ukobd2.com/upload/pro/m35080v6-eeprom-eraser-programmer-free-shipping-1021-6.jpg)
Description
M35080V6 EEPROM ERASER/PROGRAMMER
Functions:
1. Read, Program, Erase Incremental Registers\EEPROM
2. Erase time to Delivery State for M35080V6 1-10 minutes
3. Supported all clock rates 2.5, 5.0 and 6 MHz IC's
4. Erase time to Delivery State* 1-3 seconds
5. In-circuit/On-board EEPROM programming
6. On-board EEPROM programming for M35080V6
7. Onboard processor ATmega16 allow to Firmware Update to new versions
8. Self-Check capabilities
9. 4 adaptors for SO8 device
Additional items you'll need to use this tool:
1.Host: A 32 Bit x86 based or Pentium PC with a free Com1-8 communication port.
2.Power supply: An 12 Volt / 500 mA
Notice:
Delivery State: The first 32 bytes (incremental registers) are set to all "0"s, 16 words at 0000 The EEPROM memory array 0020-3FFF set to all FF. The Status register set to 10
Package including:
1pc x M35080V6 EEPROM ERASER/PROGRAMMER
2pcs x Adapter
1pc x COM Cable
1pc x CD
Functions:
1. Read, Program, Erase Incremental Registers\EEPROM
2. Erase time to Delivery State for M35080V6 1-10 minutes
3. Supported all clock rates 2.5, 5.0 and 6 MHz IC's
4. Erase time to Delivery State* 1-3 seconds
5. In-circuit/On-board EEPROM programming
6. On-board EEPROM programming for M35080V6
7. Onboard processor ATmega16 allow to Firmware Update to new versions
8. Self-Check capabilities
9. 4 adaptors for SO8 device
Additional items you'll need to use this tool:
1.Host: A 32 Bit x86 based or Pentium PC with a free Com1-8 communication port.
2.Power supply: An 12 Volt / 500 mA
Notice:
Delivery State: The first 32 bytes (incremental registers) are set to all "0"s, 16 words at 0000 The EEPROM memory array 0020-3FFF set to all FF. The Status register set to 10
Package including:
1pc x M35080V6 EEPROM ERASER/PROGRAMMER
2pcs x Adapter
1pc x COM Cable
1pc x CD
Previous: Kess V2 V5.017 Online Version No Token Limited Main Unit
Recommend Items
- US$449.00
- US$125.00
- US$450.00
- US$1,559.00
- US$39.99
- US$174.99
- US$289.00
- US$839.00
- US$14.90
- US$149.00
- US$499.00
- US$459.00
Special Items
- US$7.59
- US$29.99
- US$219.00
- US$69.99
- US$209.00
- US$47.49
- US$69.99
- US$859.00
- US$674.50
- US$39.90
- US$88.99
- US$119.00