US$109.00 / piece
US$199.00 / piece
US$79.90 / piece
US$1,198.50 / piece
US$38.50 / piece
US$1,500.00 / piece
US$9.99 / piece
US$129.00 / piece
US$1,499.00 / piece
US$459.00 / piece
US$289.00 / piece
US$44.99 / piece
US$199.00 / piece
US$159.00 / piece
US$149.00 / piece
US$1,699.00 / piece
Description
Ad-blue-obd2 Emulator for FORD Trucks Plug and Drive Ready Device by OBD2
Ad-blue-obd2 Emulator for FORD Trucks Description:
Ad-blue-obd2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on Trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install.
Top 5 Reasons to Get Ad-blue-obd2 Emulator for FORD Trucks:
1. Ad-blue-obd2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. Ad-blue-obd2 will override Ad-blue system instantly, it will stop the usage of ad-blue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. Ad-blue-obd2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. Ad-blue-obd2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug ad-blue-obd2 from OBD2 connector.
Installation and Calibration for Ford Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (FORD)
Terminal - 15
Terminal - 30
3. Plug ad-blue-obd2 into OBD2 connector
4. Turn on the ignition and check the level of ad-blue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Legal Notice
Ad-blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use ad-blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-blue/DEF tank.
Certificates: CE / RoHS
Package including:
1pc x ad-blue-obd2 Emulator Box Interface
1pc x User Manuel English
Ad-blue-obd2 Emulator for FORD Trucks Description:
Ad-blue-obd2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on Trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install.
Top 5 Reasons to Get Ad-blue-obd2 Emulator for FORD Trucks:
1. Ad-blue-obd2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. Ad-blue-obd2 will override Ad-blue system instantly, it will stop the usage of ad-blue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. Ad-blue-obd2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. Ad-blue-obd2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug ad-blue-obd2 from OBD2 connector.
Installation and Calibration for Ford Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (FORD)
Terminal - 15
Terminal - 30
3. Plug ad-blue-obd2 into OBD2 connector
4. Turn on the ignition and check the level of ad-blue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Legal Notice
Ad-blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use ad-blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-blue/DEF tank.
Certificates: CE / RoHS
Package including:
1pc x ad-blue-obd2 Emulator Box Interface
1pc x User Manuel English
Previous: Adblueobd2 Scania Euro6 Truck Emulator
Next: NexLink NL102 Heavy Duty And OBD/EOBD+CAN Diagnostic Tool
Recommend Items
US$499.00
US$69.99- US$109.00
- US$1,499.00
US$94.05
US$65.99
US$6.90
US$189.00- US$1,699.00
US$2,599.00
US$899.00
US$84.99
Special Items
US$109.00
US$2,374.05
US$75.00
US$999.59
US$659.00
US$199.00- US$1,198.50
US$23.74
US$389.00
US$179.72
US$674.50
US$46.99